Built by makers
Metermation builds rugged Remote Terminal Units that read and translate Actaris/Itron, Vemmtec and Elgas meters into a single, secure, cloud-ready data stream — no meter swaps, no proprietary lock-in.
Most sites run a patchwork of meter brands with incompatible outputs. Our RTU sits in the middle and does the translation for you — so your SCADA, billing, or cloud platform sees one consistent format.
Wired and pulse/serial inputs read Actaris/Itron, Vemmtec and Elgas registers directly — no gateway per brand.
Raw meter data is normalized and pushed out over Modbus TCP, MQTT or REST — whatever your platform expects.
Wi-Fi, Ethernet or cellular backhaul streams readings to your dashboard in real time, with store-and-forward on dropouts.
TLS-encrypted transport, signed firmware and per-device credentials keep field data tamper-resistant.
Configure meter type, scaling and reporting interval from a simple web UI — a technician can bring a site online in minutes.
Clean, timestamped, unit-consistent data drops straight into billing, leak detection and consumption analytics.
One hardware unit, pre-loaded with translation profiles for the three meter families you actually run in the field.
Buy the device and the translation capability together — commissioned and ready to read your existing meters.
If you bill, monitor or optimize flow, the RTU turns your mixed meter fleet into a single source of truth.
Send us your meter brands and site details and we'll come back with a bundle quote and integration plan. Have a question first? Ask away — the same form reaches us directly.